REFERENCES

Anon. 1991. "Forecast '91, Plastics/Composites." In Advanced Materials & Processes, 1:35-40.

Ashton, J. 1991. Cited in Enabling Technologies for Unified Life-Cycle Engineering of Structural Composites. National Materials Advisory Board NMAB-445. Washington, D.C.:National Academy Press.

Clausing, Don P. 1988. "The Total Development Process: Turning the Ten Cash Drains into a Cash Flow." Unpublished work.

Cooper, R.G., and E.J. Kleinschmidt. 1986. "An Investigation into the New Product Process: Steps, Deficiencies, and Impact." In Journal of Product Innovation Management, 3 (2):71-85.

Cross, Nigel. 1989. Engineering Design Methods. John Wiley and Sons.

Dixon, John R. 1988. "On Research Methodology Towards a Scientific Theory of Engineering Design." In Design Theory '88, ed. Sandra L. Newsome, W.R. Spillers, and Susan Finger. Springer-Verlag.

Dockum, J.F. Jr., and P.L. Schell. 1990. "Fiber Directed Preform Reinforcement: Factors That May Influence Mechanical Properties in Liquid Composite Molding." In Proceedings of the 6th Annual ASM/ESD Advanced Composites Conference (Detroit, October).

Hauser, John, and Don P. Clausing. 1988. "The House of Quality." Harvard Business Review (May-June 1988).

Henshaw, J.M. 1989. "A Framework and Tools for the Early Design Decisions in the Product Development Process." Ph.D. dissertation, Materials Science Program, University of Delaware.

Hise, R.T., L. O'Neal, J.U. McNeal, and A. Parasuraman. 1989. "The Effect of Product Design Activities on Commercial Success Levels of New Industrial Products." In Journal of Product Innovation Management, 6 (1):43-50.

Hubka, V. 1982. Principles of Engineering Design. Springer-Verlag.

Japan Society for the Promotion of Machinery Industry. 1990. "Survey on the Interaction Among Important Industrial Technologies." Tokyo.

Karbhari, V.M., and D.J. Wilkins. 1991a. "Constituent Scale and Property Effects on Fiber-Matrix Debonding and Pull-out." In Journal of Materials Science 26:5888-5898.

------. 1992a. "Tensile Failure Load and Fiber Diameter as Stochastic Variables in the Determination of Fiber Strength Statistics." In Reliability Engineering and System Safety 35:73-76.

------. 1990. "A Theoretical Model for Fiber Debonding Incorporating Both Interfacial Shear and Frictional Stresses." In Scripta Metallurgical et Materialia, 24:1197-1202.

------. 1991b. "Significance of Longitudinal and Transversal Size Effects on the Statistics of Fiber Strength." In Philosophical Magazine A 64 (6):1331-1344.

------. 1992b. "The Use of Decision Support Systems for the Concurrent Engineering of Composites." In International Journal of Materials and Product Technology, 7 (2):125-149.

Karbhari, V.M., and S.K. Jones. 1992. "Activity Based Costing and Management in the Composites Product Realization Process." In International Journal of Materials and Product Technology 7 (3):232-244. Karbhari, V.M., S.G. Slotte, D.A. Steenkamer, and D.J. Wilkins. 1992. "Effect of Materials, Process and Equipment Variables on the Performance of RTM Parts." To appear in Composites Manufacturing.

King, Bob. 1987. Better Designs in Half the Time. GOAL/QPC.

Kodama, F. 1992. "Japan's Unique Capability to Innovate: Technology Fusion and its Implications." In Japan's Growing Technological Capability. National Research Council.

Kodama, F. 1991. Analyzing Japanese High Technologies: The Techno-Paradigm Shift. New York:Pinter Publishers.

Koen, Billy V. 1985. The Definition of the Engineering Method. Washington, D.C.:American Society of Engineering Education.

Krolewski, S.M. 1989. "Study of the Application of Automation to Composites Manufacture." Materials Technology Lab, Technical Report TR89-47.

National Research Council. 1992. Japan's Growing Technological Capability. National Academy Press.

Pennell, J.P., and W.E. Akin. 1990. "An Examination of Various Methods Used in Support of Concurrent Engineering." IDA Paper P-2318.

Pugh, Stuart. 1981. "Concept Selection: A Method that Works." ICED Conference '81 (Rome).

Robinson, M.J. 1991. "A Qualitative Analysis of Some of the Issues Affecting the Cost of Composite Structures." In Proceedings of the 23rd International SAMPE Technical Conference. Covina, CA.

Ramkumar, R.L., R.B. Vastava, and S.K. Saha. 1991. "Manufacturing Cost Model for Composites." Ibid.

Sargent P.M. 1990. "Materials Data Interchange for Component Manufacture." In Engineering with Computers 6:237-247.

Slotte, S.G. 1992. Private communication with author.

Steele, G., S. Byers, D. Young, and R. Moore. 1988. "An Analysis of Injection Molding by Taguchi Methods." In Proceedings of ANTEC '88 Conference.

Warner, J.C., and J. O'Connor. 1989. "Molding Process is Improved by Using the Taguchi Method." In Modern Plastics :65-68 (July 1989).

Wilkins, D.J., and V.M. Karbhari. 1991. "Concurrent Engineering for Composites." In International Journal of Materials and Product Technology 6 (3):257-268.

Winner, R.I., J.P. Pennell, H.E. Bertrand, and M.M.G. Slusarczuk. 1988. The Role of Concurrent Engineering in Weapons System Acquisition. IDA Report R-338.


Published: April 1994; WTEC Hyper-Librarian