REFERENCES

Dong, S.X., E. Niyama, K. Anzai. 1995. "Free Deformation of Initial Solid Shell of Fe-C Alloys," ISIJ International, Vol. 35, No. 6, pp. 730-736.

Dong, S., E. Niyama, K. Anzai. 1994. "Direct Observation of Shell solidified at Melt-Chill Contact," Materials Transactions, JIM, Vol. 35, No. 3, pp. 196-198.

Funakubo, T., K. Oda, K. Anzai, and E. Niyama. "Fluidity of Hypereutectic Aluminum-Silicon Alloy." (in Japanese).

Inoue, A. 1995. "High Strength Bulk Amorphous Alloys with Low Critical Cooling Rates (Overview)," Materials Transactions, JIM, Vol. 36, No. 7, pp. 866-875.

Inoue, A. "Recent Progress of Zr-Based Bulk Amorphous Alloys." Submitted for publication.

Inoue, A., A. Takeuchi, A. Makino, and T. Masumoto. "Soft and Hard Magnetic Properties of Nanocrystalline Fe-M-B (M=zr, Nd) Base Alloys Containing Intergranular Amorphous Phase." Submitted for publication.

Kim, S.G., T. Umeda, K. Murata, D. Sakurai, and M. Minami. 1994. "Development of New Container Manufacturing Process by Vertical Type Centrifugal Casting Method and its Solidification Analysis," 5th International Symposium on the Physical Metallurgy of Cast Iron, Nancy, France, October.

Kobayashi, K. and N. Miwa. 1994. "Applications of Cold Crucible Levitation Melting to TiAl Casting," International Symposium on Electromagnet Processing of Materials, Nagoya, ISIJ, pp. 359-353.

Liu, Z., T. Okane, M. Ikeda, and T. Umeda. 1995. "Eutectic Solidification and Phase Selection of W-Cr Cast Iron," Proceedings of the 3rd Asian Foundry Congress, edited by Lee, Z.H., C.P. Hong, and M.H. Kim. The Korean Foundrymen's Society, Kyongju, Korea, November 8-10, pp. 223-230.

Ministry of International Trade and Industry (MITI). 1995. Industrial Science and Technology Frontier Program (ISTF). p. 5. Brochure in English and Japanese.

Miwa, K., K. Kabayashi, T. Nishio, and I. Kim. 1995. "Semisolid Forming of Magnesium Alloys and Composites," Proceedings of the 3rd Asian Foundry Congress, edited by Lee, Z.H., C.P. Hong, and M.H. Kim. The Korean Foundrymen's Society, Kyongju, Korea, November 8-10.

Miwa, K., K. Kabayashi, and T. Nishio. 1994. "Thixoforming of Partially Remelted Magnesium Alloys," The 3rd International Conference on Semisolid Processing of Alloys and Composites, pp. 483-492.

Miwa, K., K. Kabayashi, T. Nishio, and T. Ohashi. 1992. "Preparation of SiC Whisker Reinforced Al Alloy Composites by Compocasting Process," Proceedings of the 6th Japan-U.S. Conference on Composite Materials, June 22, pp. 425-433.

Mizukami, H., T. Suzuki, T. Umeda, and W. Kurz. 1995. "Initial Stage of Rapid Solidification of 18-8 Stainless Steel," Materials Science and Engineering, A173, pp. 363-366.

Murata, K., M. Mamiya, P. Suvanchai, and T. Umeda. "Solidification and Falling Flow of AC4C Alloys During Vertical Continuous Casting for Containers without Cores." (in Japanese).

Nakagawa, T., T. Umeda, J. Murata, Y. Kamimura, and N. Niwa. 1995. "Deformation Behavior during Solidification of Steels," ISIJ International, Vol. 35, No. 6, pp. 723-729.

Nakagawa, T., P. Suvanchai, T. Okane, and T. Umeda. 1995b. "Deformation Behavior During Solidification of Steels and Aluminum Alloys," Second International Conference on Solidification and Gravity, Miskole, Hungary, April.

National Science Foundation, Tokyo Office (NSF/Tokyo). 1997. (Personal communication from M. Miyahara of NSF/Tokyo to G. Holdridge of WTEC staff quoting MITI officials NSF/Tokyo contacted by phone).

Suvanchai, P., T. Okane, and T. Umeda. 1995. "Deformation Behaviors in the Mushy Zone of Aluminum Alloys," Proceedings of the 3rd Asian Foundry Congress, edited by Lee, Z.H., C.P. Hong, and M.H. Kim. The Korean Foundrymen's Society, Kyongju, Korea, November 8-10, pp. 231-238.

Umeda, T., T. Okane, and W. Kurz. "Phase Selection During Solidification of Peritectic Alloys," Accepted for publication by Acta Metall. Mater.


Published: March 1997; WTEC Hyper-Librarian